Cisco Meraki MR28 1.5 Mbit/s White Power over Ethernet (PoE)

SKU
MR28-HW
£216.25 £180.21
In stockNext Day Delivery
1.5 Gbps, 2.4 GHz, 5 GHz, Bluetooth, 2 x 2:2 MU-MIMO 802.11ax, Ethernet, PoE, 202 x 124 x 25.8 mm, 272 g
Dual–radio aggregate frame rate of up to 1.5 Gbps
5 GHz 2x2:2 radio and 2.4 GHz 2x2:2 radio offer a combined dual–radio aggregate frame rate of 1.5 Gbps*, with up to 1,201 Mbps in the 5 GHz band and 286 Mbps in the 2.4 GHz band. Technologies like transmit beamforming and enhanced receive sensitivity allow the MR28 to support a higher client density than typical enterprise-class access points, resulting in better performance for more clients, from each AP.

Multi-User Multiple Input Multiple Output (MU-MIMO)
With support for features of 802.11ax, the MR28 offers MU-MIMO and UL/DL OFDMA for more efficient transmission to multiple clients. Especially suited to environments with numerous mobile devices, MU-MIMO enables multiple clients to receive data simultaneously. This increases the total network performance and improves the end-user experience.

Automatic cloud-based RF optimization
The MR28’s sophisticated and automated RF optimization means that there is no need for the dedicated hardware and RF expertise typically required to tune a wireless network. Collected RF data is continuously fed back to the Meraki cloud. This data is then used to automatically tune the channel selection, transmit power, and client connection settings for optimal performance under even the most challenging RF conditions.

Integrated enterprise security and guest access
The MR28 features integrated, easy-to-use security technologies to provide secure connectivity for employees and guests alike. Advanced security features such as AES hardware-based encryption and Enterprise authentication with 802.1X and Active Directory integration provide wired-like security while still being easy to configure. One-click guest isolation provides secure, Internet-only access for visitors. PCI compliance reports check network settings against PCI requirements to simplify secure retail deployments.

Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration
Meraki Systems Manager natively integrates with the MR28 to offer automatic, context-aware security. Systems Manager’s self-service enrollment helps to rapidly deploy MDM without installing additional equipment, and then dynamically tie firewall and traffic shaping policies to client posture.

Application-aware traffic shaping
The MR28 includes an integrated layer 7 packet inspection, classification, and control engine, enabling the configuration of QoS policies based on traffic type, helping to prioritize mission-critical applications while setting limits on recreational traffic like peer-to-peer and video streaming. Policies can be implemented per network, per SSID, per user group, or per individual user for maximum flexibility and control.

Voice and video optimizations
Industry standard QoS features are built-in and easy to configure. Wireless MultiMedia (WMM) access categories, 802.1p, and DSCP standards all ensure important applications get prioritized correctly, not only on the MR28 but on other devices in the network. Unscheduled Automatic Power Save Delivery (U-APSD) and new Target Wait Time features in 802.11ax clients ensure minimal battery drain on wireless VoIP phones.

Self-configuring, self-maintaining, always up-to-date
When plugged in, the MR28 automatically connects to the Meraki cloud, downloads its configuration, and joins the appropriate network. If new firmware is required, this is retrieved by the AP and updated automatically. This ensures the network is kept up-to-date with bug fixes, security updates, and new features.

Advanced analytics
Drilling down into the details of network usage provides highly granular traffic analytics. Visibility into the physical world can be enhanced with journey tracking through location analytics. Visitor numbers, dwell time, repeat visit rates, and track trends can all be easily monitored in the dashboard and deeper analysis is enabled with raw data available via simple APIs.

Bluetooth Low Energy Beacon and scanning radio
An integrated Bluetooth radio provides seamless deployment of BLE Beacon functionality and effortless visibility of Bluetooth devices.
SKUMR28-HW
EAN0810979019046
ManufacturerCisco
In StockY
Data transmission
Ethernet LAN data rates10,1000 Mbit/s
Maximum data transfer rate1.5 Mbit/s
Performance
2.4 GHzYes
5 GHzYes
Wireless isolationYes
Wi-Fi Multimedia (WMM)/(WME)Yes
Firmware upgradeableYes
Spread spectrum methodOFDMA
VLAN supportYes
Quality of Service (QoS) supportYes
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.11b, IEEE 802.11e, IEEE 802.11g, IEEE 802.11h, IEEE 802.11i, IEEE 802.11k, IEEE 802.11n, IEEE 802.11r, IEEE 802.11u
Ethernet LAN data rates10,1000 Mbit/s
Maximum data transfer rate1.5 Mbit/s
MIMO typeMulti User MIMO
MIMOYes
Wi-Fi roamingYes
Network
Spread spectrum methodOFDMA
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.11b, IEEE 802.11e, IEEE 802.11g, IEEE 802.11h, IEEE 802.11i, IEEE 802.11k, IEEE 802.11n, IEEE 802.11r, IEEE 802.11u
Management features
VLAN supportYes
Quality of Service (QoS) supportYes
Firmware upgradeableYes
Features
6 GHzNo
2.4 GHzYes
5 GHzYes
Wireless isolationYes
Wi-Fi Multimedia (WMM)/(WME)Yes
Spread spectrum methodOFDMA
VLAN supportYes
Quality of Service (QoS) supportYes
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.11b, IEEE 802.11e, IEEE 802.11g, IEEE 802.11h, IEEE 802.11i, IEEE 802.11k, IEEE 802.11n, IEEE 802.11r, IEEE 802.11u
Ethernet LAN data rates10,1000 Mbit/s
Maximum data transfer rate1.5 Mbit/s
BluetoothYes
Bluetooth version5.0
Maximal-Ratio Combining (MRC)Yes
Fast roamingYes
MIMO typeMulti User MIMO
MIMOYes
Wi-Fi roamingYes
Virtual LAN featuresTagged VLAN
Bluetooth Low Energy (BLE)Yes
BeamFormingYes
Security
Security algorithmsAES, EAP-SIM, EAP-TLS, EAP-TTLS, TKIP, WEP, WPA, WPA2-Enterprise, WPA2-PSK, WPA3, WPA3-Enterprise
Ports & interfaces
Ethernet LAN (RJ-45) ports1
DC-in jackYes
Power
Power consumption (typical)15 W
Power over Ethernet (PoE)Yes
AC input voltage37 - 57 V
DC voltage range12 V
Design
Product colourWhite
LED indicatorsPower, Yes
Antenna
Antenna typeInternal
Antenna gain level (max)6 dBi
Technical details
Firmware upgradeableYes
Compliance certificatesRoHS
Indication
LED indicatorsPower, Yes
Software
Maximal-Ratio Combining (MRC)Yes
Fast roamingYes
Weight & dimensions
Width124 mm
Depth25.8 mm
Weight272 g
Height202 mm
Packaging data
AC adapter includedYes
Packaging content
AC adapter includedYes
Operational conditions
Operating relative humidity (H-H)5 - 95%
Operating temperature (T-T)0 - 40 °C
Operating altitude0 - 12192 m